Toll Free Number : (844) 966-0955

San Diego County: (760) 691-5094

Orange County: (949) 408-1055

Riverside County: (951) 467-4551

Toll Free Number : (844) 966-0955

Home » Blog » What Is The Best Way To Clean Sediment From A Water Heater?

What Is The Best Way To Clean Sediment From A Water Heater?

clean sediment from water heater

If you own a home in the city of Huntington Beach, you are familiar with water heater Installation in Huntington Beach, and you understand the importance of proper water heater installation and maintenance.

A sediment buildup in your water heater tank can affect the efficiency of the appliance and possibly even cause damage. You should clean it regularly to prevent these issues from occurring.

Unfortunately, even with regular maintenance and proper installation, sediment can still accumulate in your water heater over time.

This post will explain the best ways to carry out water heater repair in Huntington Beach, CA on your own, particularly cleaning sediment from your water heater, so you can keep it running safely and efficiently.

The tools you’ll need

With the right tools and a bit of know-how, cleaning sediment from your water heater can be a fairly straightforward process.

Before you start water heater repair in Huntington Beach, it’s important to have the right tools on hand. Here is a list of essential items for cleaning sediment from a water heater:

1. Safety goggles

When dealing with any kind of appliance repair, it’s always important to have safety goggles on hand. This is especially true when dealing with a water heater repair, as splashes of hot water or acidic solutions can cause harm to your eyes.

2. Gloves

In addition to safety goggles, it’s also important to wear gloves when cleaning sediment from a water heater. This will help protect your hands from any potential burns that could occur due to the high temperature of the water.

3. Brush

A brush will be necessary for scrubbing off any loose sediment from the surface of the tank. It’s important to use a brush specifically designed for use with a water heater as other types of brushes may be too abrasive and damage the surface of the tank.

4. Vacuum cleaner

If there are any large chunks of sediment inside the tank, a vacuum cleaner can help to remove them. Be sure to use a vacuum specifically designed for water heaters so that it can properly suck up the sediment without damaging the tank.

5. Chemical cleaner

After brushing off any loose sediment, it’s often necessary to use a chemical cleaner to dissolve any remaining sediment.

It’s important to choose an appropriate chemical cleaner for your particular type of water heater, as different models may require different solutions.

The steps to follow

Step 1. Switch off the water heater

The first step in cleaning out your water heater is to switch it off. This will prevent you from causing any damage while working on it, which could be costly in the long run.

You can either do this manually by flipping the switch off, or you can turn off the water heater by turning off its circuit breaker or flipping its switch to “off.”

Be sure to make sure that the power is completely off before you begin. This will ensure your safety and help to maintain your water heater from any damage that may occur during the cleaning process.

Call the water heater repair Huntington Beach technician for help if you are unsure at this initial stage.

Step 2. Shut off the cold water valve and wait for the water to cool

The next step is to turn off the cold water valve that feeds into the water heater. This will prevent any hot water from flowing into your home while you’re cleaning out the sediment. You can usually access this valve by following a pipe back from your faucet or shower head.

Once you’ve turned off all of the above components, let the water cool down and drain out. This can take up to 24 hours, so be patient!

Step 3. Connect a garden hose or drain to the tank’s side drain valve

Attach a drain hose or garden hose to the drain valve on the side of the water heater and turn on a hot faucet in your home. Any remaining air in the tank will be pushed out by doing this, making emptying simpler.

Don’t Forget! You may also want to consider enlisting the help of a professional. If your water heater is older, it may be more cost-effective to contact a local heater repair Huntington Beach technician who can professionally assess your unit and ensure the repair is carried out correctly. In the long term, you can save money and time by doing this.

Step 4. Put the hose’s tip in a container or drain

The end of the hose should go into a bucket or drain. This will catch any water that comes out of the tank if you wish. You can also attach this hose to a garden hose outside if you want to drain it directly into your yard or garden.

You want to make sure that the end of your drain hose isn’t submerged in water, so place it in a bucket or drain once you are done attaching it.

Step 5. Open the faucets

One of your home’s faucets should be opened. This will help push any remaining air out of the system and allow for easier draining. The goal is to get as much water out of the tank as possible before beginning.

Once all of your faucets are turned on, keep them running until they get cold. This will facilitate removing any remaining air from the system and facilitating drainage.

Step 6. To begin draining the tank, open the drain valve

The drain valve is located at the bottom of your water heater. It will be an orange or black valve that you can turn with a wrench. Turn the valve counterclockwise until it stops (this should take about five turns).

Once you have turned on all of your faucets, leave them running until they go cold. Once all of your faucets have been running for a while and have gone cold, you can turn off the water to your house.

This will prevent any residual air from being sucked back into the system when you open the hot water faucet later. Open the hot water faucet on your sink.

The easiest way to do this is by turning on one of your kitchen sinks. Leave it running until all of the air has escaped from around its pipes (this could take up to 30 minutes).


You must use the appropriate tools for the task. With these tools in hand, you’ll be well on your way to carrying out water heater Installation in Huntington, and you will be guaranteed of having a clean and efficient water heater in no time. You will also need to follow the above suggestions in this post!

But if you are unsure of anything you can do, look for the best way to clean sediment from your water heater technician in Huntington Beach, and then it is important to have it professionally serviced.

A professional technician of EZ Leak Detection will be able to provide the most comprehensive service, ensuring that all areas of the heater are thoroughly cleaned and inspected.

They will also be able to advise on the best course of action should further problems arise. Regular maintenance will help prolong the life of your water heater and reduce the risk of sediment buildup.

Our team takes all COVID precautionary measures while working.